ACTUAL DIBRO CLIP TIE INSTRUCTIONS! En Francais
Spare Parts (Strapping/Cushions) also
Available. Pricing here
Distributors
TOP QUALITY TREE TRELLIS TIE
INSTRUCTIONS
Press Clip down and bend it so wire passes through slots. Bulge on cushion edge faces slot area to protect bark.
Push both ends of strap through cushion & centre slot of clip. Push strap back through outer slots.
Value added: Aluminium QuikFit bar is now included with each set to aid bending the clip over wire:
-
Ensure wire is at optimum tension. Clip
MUST be curved around fully tensioned wire to work properly.
Do not allow laterals to grow directly underneath clip as growing tree may try to lift clip off wire.
Do NOT draw strap tight around trunk.. Allow at least extra half trunk width for seasonal growth in rods.
In exceptional wind double loop strap through outer slots. Also serves as self-adjusting strap tensioner.
May be used on any fully strained wire support system using 2.5 or 2.8 mm wire! Check annually.
NZ & AUS PATENT 225941 USA PATENT 4971282 EUROPE PAT. APPL. 89308722.1
DIBRO CLIP TIE
Order/Enquires
here
Supplied in a Set of 100
ties (100 clips, 100 cushions, 30M/Yds Strap = 100 @ 300mm/12" av. per tie)
Weight per set of 100: 2.9 KGs/6.38 lbs. Outer = 10 x sets of 100, 0.06 Cu
M, 31 Kgs/68.2 lbs
|
|
|
|